Dionne’s Draught Excluder 2019 - Part 16

Dionne’s Draught Excluder 2019 - Part 16

Finally I am on the last section of making the Rabbit’s Paws.

Simple Paws

The above photograph shows the Paws as they are now. As you can see that they are Curved. However they have all ended up with slightly different shapes. I decided that this simply will not do.

Start at Side

I have found some material and though not ideally what I would like it will have to do. Laying the Paw flat I start at the Leg End and secure the Thread. I will work from this point all the way around to the other side adding the material.

Fluffy Paw Edging

 

I couldn’t find any Furry material to go around the Paws. Therefore I have reluctantly had to use Fluffy Feathers. Henceforth I am now not making a Rabbit. It is an Easter Bunny!

Nice Fluffy Paws

I have finished making the Fluffy Paws. I have some Feathered material left so I am going to continue the theme with the Ears.

Crushed Fluff

I am starting at the Sides and making my way around the Ear with the material. One thing I did not mention when doing the Paws was the Stitch I was using to Sew the Fluffy material to the Paw.

I am using a simple Looping Stitch. I am not sure if there is a technical name for this. I am putting the needle through 1 Side and then repeating on the same Side. I have not used Blanket Stitch as this would Crush the Feathers even more.

Ear We Go

Once the Feathery material was added all the way around I began to De-Crush it. Using a needle I gently teased out the Crushed Feathers.

You can see the difference between the last two photographs. So Ear we go. Four Fluffy Paws and a Pair of Fluffy Ears for our Easter Bunny.

Dionne’s Draught Excluder 2019 - Part 15

Dionne’s Draught Excluder 2019 - Part 15

I am continuing with making the Paws.

Paw Slip Original

After turning the Slip the correct way around. I place it on to the Leg.

Paw Slip Curved

Using a Blanket Stitch I Curve the Top Edges of the Paw Slip.

Slip on Paw

The above photograph shows the Curved Paw Slip on the Leg. As you can see there is still a bit of loose material. The Curved Edges look very pinched from this angle.

Small Stuffing

Since there is not much room for filling between the Slip and the Leg I have had to cut the Stuffing into very small pieces. Otherwise when filling there will be unsightly bulges.

Blanket Stitch Paw

I have Stuffed the Paw Slip and need to do more manipulation of the End. Since I do not want the Slip to move around whilst I am working on it I have to secure it.

Important

I Sew the Slip to the Leg using a Blanket Stitch. However prior to this I had to make sure that the Slip was in the right position on the leg. This was done by placing the Leg how it would be attached to the body. That would show the correct angle of the Paw. DO Not use the Seam of the Leg as a guide as I found it can twist quite badly whilst being stuffed.

Double Curve

 

Once the Slip is secured I could go back to the Curved End. Using the same Technique I Sewed the Curve again. I pulled the material tight and some of the Stitching was far nearer to the Centre of the Slip.

This was actually easier than I thought it would be. Now the Paw was Stuffed I had more to get hold of and the needle went through quite easily.

Dionne’s Draught Excluder 2019 - Part 4

Dionne’s Draught Excluder 2019 - Part 4

With the run up to Yule and Christmas or as I refer to it the ‘Silly Season’ I have decided to make this a short blog.

Black Paw Outline

The part I am working on this time is making a Paw. I Fold the material and then draw a Rectangle in Chalk on it. I Pin the material together so it doesn’t slip whilst I cut out.

Black Paw Replication

 

The easiest way to get the other Paws was to Pin the first one I cut out onto the Folded material again. I could then Replicate the Paws until I have 4 in total.

Paws Four One

Once I had cut out all 4 Paws I proceeded to Blanket Stitch the Edges nearly to the end. I then strengthened them by using a Tacking Stitch underneath.

In the photograph above the Top Paw is how it looks when I finished Sewing. The 3 Paws underneath have been turned the Right way around.