Showing posts with label Scratch. Show all posts
Showing posts with label Scratch. Show all posts

Thursday, 10 February 2022

Chaise Longue Chat 2021 Refurbishment Part 5

 Chaise Longue Chat 2021 Refurbishment Part 5

This is the final Part of the Chaise Longue Refurbishment. I am moving on to the Skirt.

Scratch Marks

 






Oh no I discovered that all the moving has Scratched my new Paintwork.

Permanent Marker

 







I didn’t want to risk Repainting the Legs with my material flapping around so I did a quick touch up with a Permanent Marker.

Measure Skirt Rear

 






I measured the material I needed for the Rear and Side Skirt. I am not going along the Full Rear of the Chaise Longue as I don’t want it catching on things.

However I do want it to Cover the Plastic Part so I have to make sure that I have enough material to do so once Hemmed.

Glue Back and Side

 







Once Hemmed I Glued the material in place. I also added a few Stitches for Strength 

Glue Front

 





After the Side had dried I started on the Front Skirt. I turned the Chaise Longue on its Rear to make life easier for the Gluing and next step.

Nail Front


 







I wanted the Chaise to fit in with the Boxes I had already done. So I decided to Hammer Brass Tacks along the Top of the Skirt. This is not only aesthetic but will give added strength for when the Skirt is lifted to fetch items from underneath the Chaise.

Chaise Longue Complete



Voila! The Chaise Longue is now upright and Complete. I added a few more Tacks to help Secure the material around the Front Part Edge. I also placed Tacks where the original Buttons were.

The Skirt isn’t quite as Straight as I would like nor are the Tacks completely even. However the Tacks had to contend with unseen brackets. It may not be perfect but I am exceptionally pleased with my efforts.

Thursday, 26 August 2021

All Steam Ahead 2021 – Belt Up Part 2

 All Steam Ahead 2021 – Belt Up Part 2

Now I have my Belt the correct Colour I have to tackle my next problem.

Measure Up


 





There are only a few Holes in the Belt. However for what I have in mind I need Holes all the way around. As I do not have a tool for making Belt Holes I have had to Improvise.

My friend Laura suggested using a Dremel but after trying that I changed to a Hook. I used the Ruler to get the Holes evenly spaced.

Fold Back

 



Well that didn’t work out to well! It was so tough to get through and not only that I didn’t seem to be getting the Holes even.

On top of everything else when I looked closer I saw that the Holes already in the Belt weren’t actually round they were more Oval in Shape. I had to rethink.

Scratch and Snip


 









I decided to Fold the Belt over until the Holes matched up. I then Scratched the Shape by using a pair of Scissors. I then Unfolded the Belt.

Using the Scratched Shape as a guide I then Pushed the Scissors through. I carried on doing this back and forth until I had a decent sized Hole. Once the Hole was large enough I had to trip the Back so it was nice and neat.