Chaise Longue Chat 2021 Refurbishment Part 5

 Chaise Longue Chat 2021 Refurbishment Part 5

This is the final Part of the Chaise Longue Refurbishment. I am moving on to the Skirt.

Scratch Marks

 

Oh no I discovered that all the moving has Scratched my new Paintwork.

Permanent Marker

 

I didn’t want to risk Repainting the Legs with my material flapping around so I did a quick touch up with a Permanent Marker.

Measure Skirt Rear

 

I measured the material I needed for the Rear and Side Skirt. I am not going along the Full Rear of the Chaise Longue as I don’t want it catching on things.

However I do want it to Cover the Plastic Part so I have to make sure that I have enough material to do so once Hemmed.

Glue Back and Side

 

Once Hemmed I Glued the material in place. I also added a few Stitches for Strength 

Glue Front

 

After the Side had dried I started on the Front Skirt. I turned the Chaise Longue on its Rear to make life easier for the Gluing and next step.

Nail Front

 

I wanted the Chaise to fit in with the Boxes I had already done. So I decided to Hammer Brass Tacks along the Top of the Skirt. This is not only aesthetic but will give added strength for when the Skirt is lifted to fetch items from underneath the Chaise.

Chaise Longue Complete

Voila! The Chaise Longue is now upright and Complete. I added a few more Tacks to help Secure the material around the Front Part Edge. I also placed Tacks where the original Buttons were.

The Skirt isn’t quite as Straight as I would like nor are the Tacks completely even. However the Tacks had to contend with unseen brackets. It may not be perfect but I am exceptionally pleased with my efforts.

Renovating Box Seats 2017 Part 4

Renovating Box Seats 2017 Part 4

Now I have finished all the hemming it is time to fix the material to the Box

Securing Material at Back

My initial idea was to staple the material in place so I bought a stapler. However there was some fault with it and I had to return it. There wasn’t another stapler that suited my purposes so I had a quick stroll down to Wilko’s.

I wanted some tacks but I didn’t really want anything that looked to modern or garish. Luckily I spotted some antique bronze coloured tacks so I bought those – I bought a couple of packets to be on the safe side.

I made sure the material was as far to the back as possible without it being trapped and secured it with two tacks, one roughly about the middle of the hinges.

Securing Material at Front

Next I pulled the material taut and fixed with one tack at the centre of the front part of the lid.

Securing Material Underneath

Once I had these initial three holding tacks in I proceed to fold the rest of the hem underneath and put some securing tacks in there.

I have to say I am glad I bought two packs of 50 tacks because I bent quite a few. This is because as you can see in the above photograph there are quite a few nails in the wood already and I kept catching them.

Finished Box Seat

 

The folding over of the edges at the corners was a bit of a nightmare and was impossible to photograph whilst doing. I folded the corners to the side and back to keep the front side looking smart. I also added the rest of the tacks as evenly as I could to secure the material in place.

I think you will agree it hasn’t turned out too badly.