Refurbished Mini Footstool 2021

 Refurbished Mini Footstool 2021

With the Chaise Longue and Footstool looking nice I just had to do the Mini Footstool too.

Red Footstool

 

The Mini Footstool is sturdier than the other Footstool and will have to be covered properly rather than a Slipcover.

Initial Pins

 

First I check how much material I need by a Corner with a couple of Pins. I need to be able to Cover the Centre and the Edges.

Glue Top

 

I spread the Glue all over the Top of the Mini Footstool so I can begin sticking the material.

Glue and Pin Front

 

I Glue what I am going to refer to as the Front of the Mini Footstool. I then proceed to carefully place the material over that so it Covers the Edge.

Next I place the material over the Glued Top of Stool. I then put a couple of Pins in the Front to hold whilst drying.

Glue and Pin Sides

 

I Glue and Pin the material along the Sides of the Mini Footstool.

Glue Left

 

That was the easy bit. I now have to make the Edges look neat. I am going to do that by Folding the Corner around from the Front.

I Glue the Triangular Shape and Press it tight against the Side keeping the Bottom Edge level.

Glue and Pin Side

The material on the Right Side which would be coming off the Rear of the Stool was slightly long. I Cut and Hemmed this part prior to Gluing and Pinning.